iTracer Series
Description
The charge controllers of the iTracer series are industrial goods with advanced Maximum Power Point Tracking (MPPT) algorithm. They can deliver the maximum available power for charging batteries.
Properties
- MPPT (Max Power Point Tracking)
- Maximum charging current 60 amps
- Automatic system voltage detection 12/24/36/48V
- Solar input module open circuit voltage from 5V to 145V open circuit voltage
- Battery deep discharge protection, overcharge protection, overvoltage protection
- RS485/ Can-bus interfaces available
- Monitoring via PC software
- Temperature-dependent charging parameter correction
- Fanless convection cooling up to 50°C
- Timer function up to 1-15 hours Option for night lighting
- Automatic day/night detection
- Load output with switch-off option
- 4 battery types adjustable ( open acid, AGM, gel, user)
Technical specifications
- Battery nominal voltage 12/24/36/48 DC
- Module open circuit voltage up to 145V DC
- Max. Module power 720W (12V) / 1440W (24V) / 2160W (36V) / 2880W (48V)
- Max. Charging current 60 A
- Typical self-power consumption <1.5 W.
- Temperature range - 25 ° C to + 60 ° C
- Degree of protection IP20
- Dimensions in mm 440 x 231 x 110
- Weight 5.9 kg
- Connection terminals 35 mm²
Features
The controller can be monitored and set using the software supplied. The controller can be monitored using the PC software. 4 battery types can be set. In the user battery type, the voltages can be freely selected and programmed via the software. (Lithium batteries) A switchable load output gives the user the option of switching on or off all consumers that are connected to the solar charge controller by pressing a button on the controller or via software settings on the PC. 2 timers can control night lighting as soon as the controller detects "night" through the solar module. Yield measurement of all system parameters and monitoring possible via PC software.
