The GoMate series combines design with technology and is an eye-catcher among solar charge controllers.

The fully integrable solar charge controllers were specially developed for an aesthetically unobtrusive installation. They work with an efficient PWM charging mode and are equipped with a special LCD display that shows the real-time data of the system.

All operating states can be read easily and quickly on the display. The charge controller works completely automatically and is easy to use.

The GoMate regulates the PV current and protects your battery against overcharging. The device is compatible with 12-24 volt photovoltaic systems and can be used with any off-grid solar system, e.g. in mobile homes, garden houses, boats or vehicles.

Properties

• Fully integrable device in a modern design
• High quality and fail-safe components for a long product life
• Intelligent 3-stage charging curve: bulk, boost / equalize and float
• Battery types: Sealed, Gel, Flooded and User (AGM, Gel, Liquid and User)
• Real time energy statistics
• Battery temperature compensation function
• Digital LCD monitor for an informative display of operating parameters and error messages
• Connection for voltage drop and temperature compensation
• RS-485 interface with Modbus protocol and short-circuit protection for 5V / 200mA applications
• Different communication options
• Nominal charging power at operating temperature without reduction
• Comprehensive electronic protection
• Display and setting of the parameters via PC software or app

Datasheet English

Datasheet German

Manual English

Manual German

BUY NOW

The VS series is a generation of charge controllers for off-grid solar systems, such as street lighting, solar home systems or small power plants, etc. It combines an LCD display, reliable battery charging, fully electronic protection, programmable parameters as well as other features and powerful functions.

Advantages

• Intelligent 3-level PWM charge detection: bulk, boost / equalize, float
• 3 supported battery options: Sealed, Gel, and Flooded
• LCD display
• Multiple types of load control
  Battery temperature compensation
  Comprehensive electronic protection devices

Available in:

• 30/45/60 A for 12/24/36 / 48V system voltage
• 10/20/30/45/60 A for 12 / 24V system voltage

Properties

• Keeps the battery fully charged
• Can be used for acid, AGM, gel
• Reverse polarity protection for battery and solar panel
• External battery temperature sensor can be connected
• Prevents damage to the battery
• Automatic shutdown if the charging current exceeds the capacity of the controller
• Timer function option for night lighting
• LCD display
• PWM modulation
• 2 USB ports

Application

• Solar lighting system
• Solar home system
• Solar monitoring
• Caravan and boats
• Solar road traffic signals
• Solar power plant

Technical specifications

PWM charge controller 10/20/30/45/60 A

• System voltage 12 / 24V
• Open circuit voltage up to 50V
• Positive grounding

PWM charge controller 30/45/60 A

• System voltage 12/24/36 / 48V
• Open circuit voltage up to 96V
• Positive grounding

Datasheet English

Datasheet German 12-24V

Datasheet German 12-48V

Manual English

BUY 12-24V NOW

BUY 12-48V NOW

The devices of the VS BN series can charge and discharge a battery automatically, especially with off-grid PV systems.

The current operating state is determined by a hybrid actuator and, as a result, the charging process is optimized by the principle of pulse width modulation. Therefore, PWM charge controllers are significantly more effective than simple linear charge controllers.
The built-in microprocessor gently charges the battery, thereby guaranteeing a long lifespan for your solar batteries.

The charge status and the charging via the solar module can be seen from the LEDs. The built-in undervoltage protection prevents the battery from over-discharging. Overcharging of the batteries is thus prevented since the charge controller ends the charging process when the full capacity is reached.

Properties

• Keeps the battery fully charged
• Can be used for acid, AGM, gel and lithium batteries
• Prevents the battery from supplying voltage to the solar system at night
• Reverse polarity protection for battery and solar panel
• External battery temperature sensor can be connected
• RS485 / interface with Modbus protocol available
• Automatic shutdown if the charging current exceeds the capacity of the controller
• Automatic temperature compensation (ATC)
• Timer function up to 1-15 hours option for night lighting
• LED shows the charge status of the battery
• LCD display with 4 buttons selection and menu
• PWM modulation
• Automatic switching on / off of the charging current, depending on the battery charge
• 4 battery types adjustable (open acid, AGM, gel, user)
• Suitable for lithium batteries

Application

• Solar home system
• Traffic signals
• Solar lighting
• Video surveillance

Technical specifications

PWM charge controller 10/20/30/45 A

• System voltage 12 / 24V
• Open circuit voltage up to 50V
• Negative grounding

PWM charge controller 45/60 A

• System voltage 12/24/36 / 48V
• Open circuit voltage up to 96V
• Negative grounding

Datasheet English

Datasheet German 12-24V

Datasheet German 12-48V

Manual English

Manual German

BUY 12-24V NOW

BUY 12-48V NOW

The EP series is a double battery charging control for caravans, campers, boats and golf carts etc. The charging priority can be selected.

Solar charge controller with system voltages from 12V to 24Volt for 2 different batteries with up to 320/640 Watt module output at 12V / 24Volt battery voltage.

The charge controller is connected between the solar module and the consumer battery and vehicle battery and controls the charging process so that the batteries are always charged to the maximum. It can charge one battery as well as two different batteries with different priorities.
The built-in microprocessor gently charges the battery, thereby guaranteeing a long lifespan for your solar batteries.

The charge status and the charging via the solar module can be seen from the LEDs.
Overcharging of the batteries is prevented since the charge controller ends the charging process when the full capacity is reached.
The integrated microprocessor controls the switching thresholds of the charging process precisely and temperature stable.

Product characteristics

• RJ45 interface for remote display for optional external display MT1
• Yield measurement with optional display
• PWM charging with temperature compensation
• LED display for charging and battery charge status
• Keeps the battery fully charged
• Prevents the battery from supplying voltage to the solar system at night
• Reverse polarity protection for battery AND solar panel
• Automatic temperature compensation (ATC)
• LED shows the charge status of the battery
• Automatic switching on / off of the charging current, depending on the battery charge
• 3 battery types adjustable (acid, AGM, gel)

Technical specifications

• System voltage: 12V, 24V (automatic detection)
• Nominal PV power: 160 / 320W (12V) 320 / 640W (24V)
• Maximum charging current: 10-20A
• DC input voltage (modular working voltage) max. 27V with 12V battery and 37V with 24V battery
• Leakage current with no charge: = <4mA
• Temperature compensation: -30mv / ° C / 2V
• Temperature range: -35 ° C to + 55 ° C
• Dimensions: 153 x 76 x 37 mm
• Weight: 100 g
• Protection class IP20 (dry room)
• Connection terminals for max. Cable cross section 6mm²

Manual English

Manual German

BUY NOW

Charge Controller EPSolar PWM LS1024EPD 10A 12/24V

• 12/24 VDC
• Day / Night recognition
• LED Indicator for battery status
• Electronic protection
• Intelligent timer function (1-13h)
• IP67 protection
• PWM charging method to increase battery lifetime
• 3-step intelligent PWM-Charging: Bulk, Boost / Equalize, Float

Charge controller EPSolar PWM LS1024EPD 10A 12/24V

Characteristics

• One button for all Settings
• Electronic protection functions:
  • Overcharging
  • Over discharging
  • Overload
  • Short circuit
  • Reverse polarity of the PV modules
• Suitable for industry, many application possibilities
• PWM charging function for maximum performance

Technical data

• Nominal voltage: 12/24 V automatic detection
• Max. PV Input voltage: 50V
• Charging current: 10A
• Battery types adjustable: Sealed (factory setting), Gel, Flooded
• Dimensions: 108.5 x 75 x 25.6 mm
• Weight: 0,41 kg
• Protection class: IP67
• Working temperature range: -35°C to + 55°C
• Timer function

Datasheet english

Datasheet german

Manual english

 Charge controller EPSolar PWM LS-EU Series

The LS-EU solar charge controller is a new member of the LandStar family and is ideal for small solar installations, especially household systems.

The LS-EU series also has a + 5V / 1.2 A USB port to charge e.g. mobile phones, fans and other electronic devices.

Features

• Highly efficient PWM charging technology to increase battery life and improve solar yield
• Using MOSFET as an electronic switch, without mechanical switches or relays
• Intuitive LED indicators for battery voltage status
• 3 different battery types adjustable Gel, AGM or open lead acid battery
• Manual control of the consumer output possible
• Temperature compensation for optimal charging and discharging of the battery
• User-friendly, comfortable and easy to adjust

Electronic protection functions

• Overload protection
• Short circuit protection
• Battery deep discharge protection
• Battery reverse polarity protection

BUY NOW