The XTRA-N series can display different display units (XDB1 / XDS1 / XDS2).
The series includes a water-repellent housing (design) with protection class IP32.
With the new XTRA-N series, the reliability of the devices has been significantly improved, so they meet a wide range of application requirements.
 |
| BUY NOW |
 |
| BUY NOW |
MPPT (Max Power Point Tracking) makes optimal use of the full power of your solar modules.
For all common module technologies, optimal for solar systems with module voltages that are higher than the battery voltage. With these controllers you can also use modules that are actually intended for use in grid-connected systems.
The most efficient working point of the solar modules changes due to various factors, such as module temperature, irradiation, module type etc. This working point is constantly monitored by the internal microcontroller and, if necessary, controlled in such a way that the optimal performance of the solar module is given and your batteries are charged with the respective greatest current .
Properties
- advanced MPPT technology
- high efficiency of not less than 98%
- \\\\\\\\\\\\\\\\\\\\\\\\\\\\“ultra-fast\\\\\\\\\\\\\\\\\\\\\\\\\\\\“ recording speed
- precise detection of several maximum power points (MPP)
- multifunctional LCD display
- manual adjustment of the battery types, load control etc.
- negative grounding via (-) pole
- RS485 interface with MODBUS industry standard
- Fully programmable functions via PC software
- automatic limitation of charging power and current
- large MPP operating voltage range
- compatible with lead-acid and lithium-ion batteries
- Battery temperature compensation function
- Real-time energy statistics
- Overheat reduction function
- several working modes for loading
The GoMate series combines design with technology and is an eye-catcher among solar charge controllers.
The fully integrable solar charge controllers were specially developed for an aesthetically unobtrusive installation. They work with an efficient PWM charging mode and are equipped with a special LCD display that shows the real-time data of the system.
All operating states can be read easily and quickly on the display. The charge controller works completely automatically and is easy to use.
The GoMate regulates the PV current and protects your battery against overcharging. The device is compatible with 12-24 volt photovoltaic systems and can be used with any off-grid solar system, e.g. in mobile homes, garden houses, boats or vehicles.
Properties
- Fully integrable device in a modern design
- High quality and fail-safe components for a long product life
- Intelligent 3-stage charging curve: bulk, boost / equalize and float
- Battery types: Sealed, Gel, Flooded and User (AGM, Gel, Liquid and User)
- Real time energy statistics
- Battery temperature compensation function
- Digital LCD monitor for an informative display of operating parameters and error messages
- Connection for voltage drop and temperature compensation
- RS-485 interface with Modbus protocol and short-circuit protection for 5V / 200mA applications
- Different communication options
- Nominal charging power at operating temperature without reduction
- Comprehensive electronic protection
- Display and setting of the parameters via PC software or app
The Tracer AN series is based on multi-phase synchronous rectification technology (MSRT) and the advanced MPPT control algorithm. With dual-core processor architecture, the products offer high response speed, high reliability and high standards.
The advanced MPPT algorithm reduces the number of MPP lost (points of maximum performance) and the time lost for correction. Due to the increased tracking efficiency and speed, the MPP is set very quickly in order to extract the highest possible performance from the PV modules at all times.
The limiting function of charging power and current, as well as the automatic power reduction protect the system if the PV power is too high or at elevated temperatures.
The adaptable 3-stage charging curve, based on a digital control loop, enables a maximum battery life and an increase in system performance. A hybrid energy system can be easily set up using the load relay and the grid / generator control relay. Comprehensive electronic protection against overcharge, deep discharge, PV reverse polarity etc. ensures a safe and stable solar system.
The isolated RS-485 interface with standard mode protocol and 5V power supply makes system expansion easy. It supports up to 8 charge controllers in parallel operation. This results in a very wide range of uses, from caravans to single-family homes and large systems.
Inverter / charge controller UPower series from EPSolar for PV / solar applications. Suitable for solar, car, boat, camping, outdoor, caravan, motorhome etc. Ideal for use in remote areas with many hours of sunshine and with a lack of reliable suppliers.
The function of the integrated MPPT charge controller ensures fully digital and efficient energy storage and use. The inverter with integrated charge controller of the UPower series converts 12 / 48V direct current into 220 / 230V 50 / 60Hz alternating current with pure sine wave. The manual adjustment of the utility and PV electricity charges enables the ideal ratio of your energy use. This makes the UPower particularly convincing in remote environments with its reliability and responsiveness.
Characteristics
- Charge controller and inverter in one device
- High stability in the output voltage
- Selection function for the ratio of utility and solar power
- MPPT technology for determining the maximum credit point
- Numerous protective functions: over / under voltage of the battery, over / under voltage at inputs and outputs, protection against reverse polarity and short circuits
- Charging power limits
- Compensation function for temperature changes
- Protection against internal overheating with intelligent ventilation
- Sophisticated SPWM technology for the pure output of sine waves
- low distortion factor (= THD = 3%)
- 4.2 \\“display for showing the system status and real-time data
- Easy adjustment of the working parameters with 4 buttons
- Optional: Wi-Fi module for wireless monitoring and control
- Control using PC software or APP
Technical specifications
- Nominal battery voltage: 12V or 48V
- Continuous power: 800W / 4000W
- Maximum power: 2000W / 10000W (short-term peak)
Charge controller EPSolar MPPT DuoRacer 10-30A
Highly efficient, compact and reliable charge controller to use the full power of your solar modules
The MPPT charge controller DuoRacer from EPSolar was specially designed to charge two batteries in a solar system at the same time. Several battery types (Sealed, Gel, Flooded, LiFePO4 and Li-NiCoMn) are supported.
- MPPT Charge Controller 10A-30A
- 12-24V system voltage
- MPP voltage range up to 72V
- Negative grounding
Charge controller EPSolar MPPT DuoRacer 10-30A
The MPPT solar charge controller Duo Racer from EPSolar charges two batteries (BATT1 and BATT2) at the same time and is therefore ideally suited for traveling in RV, caravan or car. With the AES interface, the DuoRacer is able to supply excess PV energy to consumers such as a refrigerator.
BATT1 = Battery storage to supply consumers in an island system, household (supports Sealed, Gel, Flooded, LiFePO4, Li-NiCoMn)
BATT2 = Battery storage for vehicles, boats (supports only lead acid batteries)
Features
- MPPT technology with efficiency =99.5%.
- Well-developed MPPT control algorithm to minimize MPP loss rate
- automatic limitation of charging power and charging current
- LCD display – display and setting of parameters
- RS485 port, Modbus protocol
- Compatible with LiFePo4 and Li-NiCoMn batteries
- Automatic energy saving mode when charging power is too low
- Wide MPP operating voltage range
- Numerous protection mechanisms (deep discharge, overcharge, overvoltage protection)
- AES port for max. utilization of the PV surplus
Optional
The monitoring and evaluation of the data can be realised by using the PC software. The controller must either be connected directly to the PC via RS485 cable or via WLAN/Bluetooth with the e-box-WiFi / e-box-BLE.
A converter is required to connect consumers with 12V via the AES port.
Charge Controller EPsolar MPPT Tracer BN-Series 10-40A 12-24V
Characteristics
- MPPT (Max Power Point Tracking)
- Maximum charge current 10-40A
- Automatic system voltage detection 12/24V
- Solar input module open circuit voltage from 5V to 150V open circuit voltage
- battery deep discharge protection, overcharge protection, overvoltage protection
- RS485/ interface, Modbus protocol
- Monitoring via PC software or display MT50
- Temperature dependent charging parameter correction
- Fanless convection cooling up to 50°C
- Timer function up to 1-15 hours Option for night lighting
- Automatic day/night detection
- Load output with switch-off option
- 4 battery types adjustable ( open acid, AGM, gel, user)
- suitable for lithium batteries
Technical data
- Battery Nominal voltage 12/24 DC
- Module open circuit voltage up to 150V DC
- Max. charging current 10A – 40A
- Type. Own current consumption < 50 mA
- Temperature range – 25°C to + 60°C
- Protection class IP20
Features
The controller can be monitored and adjusted with the MT50 display or adapter cable and software. The controller can be monitored via the PC software.
There are 4 battery types adjustable. In the battery type user the voltages are freely selectable and programmable via the software. (lithium batteries)
A switchable load output enables the user to switch on or off all loads connected to the solar charge controller with one keystroke on the controller or via software settings on the PC.
2 timers can control a night lighting as soon as the controller detects \“night\“ by the solar module.
Yield measurement of all system parameters and monitoring via PC software possible.
With the optionally available display MT50 the controller can be adjusted and monitored.
The charge controllers of the iTracer series are industrial goods with an extended Maximum Power Point Tracking (MPPT) algorithm. You can supply the maximum available power for charging batteries.
Properties
- MPPT (Max Power Point Tracking)
- Maximum charging current 60 amps
- Automatic system voltage detection 12/24/36 / 48V
- Solar input module open circuit voltage from 5V to 145V open circuit voltage
- Battery deep discharge protection, overcharge protection, overvoltage protection
- RS485 / Can-bus interfaces available
- Monitoring via PC software
- Temperature-dependent charging parameter correction
- Fanless convection cooling up to 50 ° C
- Timer function up to 1-15 hours option for night lighting
- Automatic day / night detection
- Load output with switch-off option
- 4 battery types adjustable (open acid, AGM, gel, user)
Technical specifications
- Battery nominal voltage 12/24/36/48 DC
- Module open circuit voltage up to 145V DC
- Max. Module power 720W (12V) / 1440W (24V) / 2160W (36V) / 2880W (48V)
- Max. Charging current 60 A
- Type. Own power consumption <1.5 W
- Temperature range – 25 ° C to + 60 ° C
- Degree of protection IP20
- Dimensions in mm 440 x 231 x 110
- Weight 5.9 kg
- Connection terminals 35 mm²
Features
The controller can be monitored and set using the software supplied. The controller can be monitored using the PC software.
4 types of batteries can be set. In the user battery type, the voltages are freely selectable and programmable via the software. (Lithium batteries)
A switchable load output gives the user the option of switching on or off all consumers that are connected to the solar charge controller by pressing a button on the controller or via software settings on the PC.
2 timers can control night lighting as soon as the controller detects \\“night\\“ through the solar module.
Yield measurement of all system parameters and monitoring via PC software possible.
The VS series is a generation of charge controllers for off-grid solar systems, such as street lighting, solar home systems or small power plants, etc. It combines an LCD display, reliable battery charging, fully electronic protection, programmable parameters as well as other features and powerful functions.
Advantages
- Intelligent 3-level PWM charge detection: bulk, boost / equalize, float
- 3 supported battery options: Sealed, Gel, and Flooded
- LCD display
- Multiple types of load control
Battery temperature compensation
Comprehensive electronic protection devices
Available in:
- 30/45/60 A for 12/24/36 / 48V system voltage
- 10/20/30/45/60 A for 12 / 24V system voltage
Properties
- Keeps the battery fully charged
- Can be used for acid, AGM, gel
- Reverse polarity protection for battery and solar panel
- External battery temperature sensor can be connected
- Prevents damage to the battery
- Automatic shutdown if the charging current exceeds the capacity of the controller
- Timer function option for night lighting
- LCD display
- PWM modulation
- 2 USB ports
Application
- Solar lighting system
- Solar home system
- Solar monitoring
- Caravan and boats
- Solar road traffic signals
- Solar power plant
Technical specifications
PWM charge controller 10/20/30/45/60 A
- System voltage 12 / 24V
- Open circuit voltage up to 50V
- Positive grounding
PWM charge controller 30/45/60 A
- System voltage 12/24/36 / 48V
- Open circuit voltage up to 96V
- Positive grounding
The devices of the VS BN series can charge and discharge a battery automatically, especially with off-grid PV systems.
The current operating state is determined by a hybrid actuator and, as a result, the charging process is optimized by the principle of pulse width modulation. Therefore, PWM charge controllers are significantly more effective than simple linear charge controllers.
The built-in microprocessor gently charges the battery, thereby guaranteeing a long lifespan for your solar batteries.
The charge status and the charging via the solar module can be seen from the LEDs. The built-in undervoltage protection prevents the battery from over-discharging. Overcharging of the batteries is thus prevented since the charge controller ends the charging process when the full capacity is reached.
Properties
- Keeps the battery fully charged
- Can be used for acid, AGM, gel and lithium batteries
- Prevents the battery from supplying voltage to the solar system at night
- Reverse polarity protection for battery and solar panel
- External battery temperature sensor can be connected
- RS485 / interface with Modbus protocol available
- Automatic shutdown if the charging current exceeds the capacity of the controller
- Automatic temperature compensation (ATC)
- Timer function up to 1-15 hours option for night lighting
- LED shows the charge status of the battery
- LCD display with 4 buttons selection and menu
- PWM modulation
- Automatic switching on / off of the charging current, depending on the battery charge
- 4 battery types adjustable (open acid, AGM, gel, user)
- Suitable for lithium batteries
Application
- Solar home system
- Traffic signals
- Solar lighting
- Video surveillance
Technical specifications
PWM charge controller 10/20/30/45 A
- System voltage 12 / 24V
- Open circuit voltage up to 50V
- Negative grounding
PWM charge controller 45/60 A
- System voltage 12/24/36 / 48V
- Open circuit voltage up to 96V
- Negative grounding
The EP series is a double battery charging control for caravans, campers, boats and golf carts etc. The charging priority can be selected.
Solar charge controller with system voltages from 12V to 24Volt for 2 different batteries with up to 320/640 Watt module output at 12V / 24Volt battery voltage.
The charge controller is connected between the solar module and the consumer battery and vehicle battery and controls the charging process so that the batteries are always charged to the maximum. It can charge one battery as well as two different batteries with different priorities.
The built-in microprocessor gently charges the battery, thereby guaranteeing a long lifespan for your solar batteries.
The charge status and the charging via the solar module can be seen from the LEDs.
Overcharging of the batteries is prevented since the charge controller ends the charging process when the full capacity is reached.
The integrated microprocessor controls the switching thresholds of the charging process precisely and temperature stable.
Product characteristics
- RJ45 interface for remote display for optional external display MT1
- Yield measurement with optional display
- PWM charging with temperature compensation
- LED display for charging and battery charge status
- Keeps the battery fully charged
- Prevents the battery from supplying voltage to the solar system at night
- Reverse polarity protection for battery AND solar panel
- Automatic temperature compensation (ATC)
- LED shows the charge status of the battery
- Automatic switching on / off of the charging current, depending on the battery charge
- 3 battery types adjustable (acid, AGM, gel)
Technical specifications
- System voltage: 12V, 24V (automatic detection)
- Nominal PV power: 160 / 320W (12V) 320 / 640W (24V)
- Maximum charging current: 10-20A
- DC input voltage (modular working voltage) max. 27V with 12V battery and 37V with 24V battery
- Leakage current with no charge: = <4mA
- Temperature compensation: -30mv / ° C / 2V
- Temperature range: -35 ° C to + 55 ° C
- Dimensions: 153 x 76 x 37 mm
- Weight: 100 g
- Protection class IP20 (dry room)
- Connection terminals for max. Cable cross section 6mm²
Charge Controller EPSolar PWM LS1024EPD 10A 12/24V
- 12/24 VDC
- Day / Night recognition
- LED Indicator for battery status
- Electronic protection
- Intelligent timer function (1-13h)
- IP67 protection
- PWM charging method to increase battery lifetime
- 3-step intelligent PWM-Charging: Bulk, Boost / Equalize, Float
Charge controller EPSolar PWM LS1024EPD 10A 12/24V
Characteristics
- One button for all Settings
- Electronic protection functions:
- Overcharging
- Over discharging
- Overload
- Short circuit
- Reverse polarity of the PV modules
- Suitable for industry, many application possibilities
- PWM charging function for maximum performance
Technical data
- Nominal voltage: 12/24 V automatic detection
- Max. PV Input voltage: 50V
- Charging current: 10A
- Battery types adjustable: Sealed (factory setting), Gel, Flooded
- Dimensions: 108.5 x 75 x 25.6 mm
- Weight: 0,41 kg
- Protection class: IP67
- Working temperature range: -35°C to + 55°C
- Timer function
