Skip to content
2
Yes
None
1
1000
Name...
/en/products/
Thumbnail

Categories:

Sub-Categories:

Charge Controller
XTRA Series

The XTRA-N series can display different display units (XDB1 / XDS1 / XDS2).
The series includes a water-repellent housing (design) with protection class IP32.

With the new XTRA-N series, the reliability of the devices has been significantly improved, so they meet a wide range of application requirements.

MPPT XTRA 12-24V
            BUY NOW
MPPT XTRA 12-48V
            BUY NOW

 

MPPT (Max Power Point Tracking) makes optimal use of the full power of your solar modules.

For all common module technologies, optimal for solar systems with module voltages that are higher than the battery voltage. With these controllers you can also use modules that are actually intended for use in grid-connected systems.

The most efficient working point of the solar modules changes due to various factors, such as module temperature, irradiation, module type etc. This working point is constantly monitored by the internal microcontroller and, if necessary, controlled in such a way that the optimal performance of the solar module is given and your batteries are charged with the respective greatest current .

Properties

  • advanced MPPT technology
  • high efficiency of not less than 98%
  • "ultra-fast" recording speed
  • precise detection of several maximum power points (MPP)
  • multifunctional LCD display
  • manual adjustment of the battery types, load control etc.
  • negative grounding via (-) pole
  • RS485 interface with MODBUS industry standard
  • Fully programmable functions via PC software
  • automatic limitation of charging power and current
  • large MPP operating voltage range
  • compatible with lead-acid and lithium-ion batteries
  • Battery temperature compensation function
  • Real-time energy statistics
  • Overheat reduction function
  • several working modes for loading

Datasheet English

Datasheet German

Manual English

Manual German

GoMate Series

The GoMate series combines design with technology and is an eye-catcher among solar charge controllers.

The fully integrable solar charge controllers were specially developed for an aesthetically unobtrusive installation. They work with an efficient PWM charging mode and are equipped with a special LCD display that shows the real-time data of the system.

All operating states can be read easily and quickly on the display. The charge controller works completely automatically and is easy to use.

The GoMate regulates the PV current and protects your battery against overcharging. The device is compatible with 12-24 volt photovoltaic systems and can be used with any off-grid solar system, e.g. in mobile homes, garden houses, boats or vehicles.

Properties

  • Fully integrable device in a modern design
  • High quality and fail-safe components for a long product life
  • Intelligent 3-stage charging curve: bulk, boost / equalize and float
  • Battery types: Sealed, Gel, Flooded and User (AGM, Gel, Liquid and User)
  • Real time energy statistics
  • Battery temperature compensation function
  • Digital LCD monitor for an informative display of operating parameters and error messages
  • Connection for voltage drop and temperature compensation
  • RS-485 interface with Modbus protocol and short-circuit protection for 5V / 200mA applications
  • Different communication options
  • Nominal charging power at operating temperature without reduction
  • Comprehensive electronic protection
  • Display and setting of the parameters via PC software or app

Datasheet English

Datasheet German

Manual English

Manual German

BUY NOW

Tracer AN Series (50-100A)

The Tracer AN series is based on multi-phase synchronous rectification technology (MSRT) and the advanced MPPT control algorithm. With dual-core processor architecture, the products offer high response speed, high reliability and high standards.

The advanced MPPT algorithm reduces the number of MPP lost (points of maximum performance) and the time lost for correction. Due to the increased tracking efficiency and speed, the MPP is set very quickly in order to extract the highest possible performance from the PV modules at all times.

The limiting function of charging power and current, as well as the automatic power reduction protect the system if the PV power is too high or at elevated temperatures.

The adaptable 3-stage charging curve, based on a digital control loop, enables a maximum battery life and an increase in system performance. A hybrid energy system can be easily set up using the load relay and the grid / generator control relay. Comprehensive electronic protection against overcharge, deep discharge, PV reverse polarity etc. ensures a safe and stable solar system.

The isolated RS-485 interface with standard mode protocol and 5V power supply makes system expansion easy. It supports up to 8 charge controllers in parallel operation. This results in a very wide range of uses, from caravans to single-family homes and large systems.

Datasheet English

Datasheet German

Manual English

Manual German

BUY NOW

UPower Series

Inverter / charge controller UPower series from EPSolar for PV / solar applications. Suitable for solar, car, boat, camping, outdoor, caravan, motorhome etc. Ideal for use in remote areas with many hours of sunshine and with a lack of reliable suppliers.

The function of the integrated MPPT charge controller ensures fully digital and efficient energy storage and use. The inverter with integrated charge controller of the UPower series converts 12 / 48V direct current into 220 / 230V 50 / 60Hz alternating current with pure sine wave. The manual adjustment of the utility and PV electricity charges enables the ideal ratio of your energy use. This makes the UPower particularly convincing in remote environments with its reliability and responsiveness.

Characteristics

  • Charge controller and inverter in one device
  • High stability in the output voltage
  • Selection function for the ratio of utility and solar power
  • MPPT technology for determining the maximum credit point
  • Numerous protective functions: over / under voltage of the battery, over / under voltage at inputs and outputs, protection against reverse polarity and short circuits
  • Charging power limits
  • Compensation function for temperature changes
  • Protection against internal overheating with intelligent ventilation
  • Sophisticated SPWM technology for the pure output of sine waves
  • low distortion factor (= THD = 3%)
  • 4.2 "display for showing the system status and real-time data
  • Easy adjustment of the working parameters with 4 buttons
  • Optional: Wi-Fi module for wireless monitoring and control
  • Control using PC software or APP

Technical specifications

  • Nominal battery voltage: 12V or 48V
  • Continuous power: 800W / 4000W
  • Maximum power: 2000W / 10000W (short-term peak)

Datasheet English

Datasheet German

Manual English

Manual German

BUY NOW

DuoRacer Series(10-30A)

Charge controller EPSolar MPPT DuoRacer 10-30A

Highly efficient, compact and reliable charge controller to use the full power of your solar modules

The MPPT charge controller DuoRacer from EPSolar was specially designed to charge two batteries in a solar system at the same time. Several battery types (Sealed, Gel, Flooded, LiFePO4 and Li-NiCoMn) are supported.

  • MPPT Charge Controller 10A-30A
  • 12-24V system voltage
  • MPP voltage range up to 72V
  • Negative grounding

Charge controller EPSolar MPPT DuoRacer 10-30A

The MPPT solar charge controller Duo Racer from EPSolar charges two batteries (BATT1 and BATT2) at the same time and is therefore ideally suited for traveling in RV, caravan or car. With the AES interface, the DuoRacer is able to supply excess PV energy to consumers such as a refrigerator.

BATT1 = Battery storage to supply consumers in an island system, household (supports Sealed, Gel, Flooded, LiFePO4, Li-NiCoMn)
BATT2 = Battery storage for vehicles, boats (supports only lead acid batteries)

Features

  • MPPT technology with efficiency =99.5%.
  • Well-developed MPPT control algorithm to minimize MPP loss rate
  • automatic limitation of charging power and charging current
  • LCD display - display and setting of parameters
  • RS485 port, Modbus protocol
  • Compatible with LiFePo4 and Li-NiCoMn batteries
  • Automatic energy saving mode when charging power is too low
  • Wide MPP operating voltage range
  • Numerous protection mechanisms (deep discharge, overcharge, overvoltage protection)
  • AES port for max. utilization of the PV surplus

Optional

The monitoring and evaluation of the data can be realised by using the PC software. The controller must either be connected directly to the PC via RS485 cable or via WLAN/Bluetooth with the e-box-WiFi / e-box-BLE.

A converter is required to connect consumers with 12V via the AES port.

Datasheet English

Datasheet German

Manual English

Manual English

Tracer BN Series (10-40A)

The Tracer BN series is EPSOLAR's second generation of MPPT control units. Compared to the Tracer series there is an improved communication ability. The die-cast aluminum design also ensures excellent heat dissipation.

Compared to conventional PWM controllers, the MPPT technology increases the charging efficiency by up to 30%.

Properties

  • MPPT (Max Power Point Tracking)
  • Automatic system voltage detection 12/24 V
  • Solar input module open circuit voltage from 5V to 150V open circuit voltage
  • Battery deep discharge protection, overcharge protection, overvoltage protection
  • RS485 / interface, Modbus protocol
  • Monitoring via PC software or MT50 display
  • Temperature-dependent charging parameter correction
  • Fanless convection cooling up to 50 ° C
  • Timer function up to 1-15 hours option for night lighting
  • Automatic day / night detection
  • Load output with switch-off option
  • 4 battery types adjustable (open acid, AGM, gel, user)
  • suitable for lithium batteries

Technical specifications

  • Battery nominal voltage 12/24 DC
  • Module open circuit voltage up to 150V DC
  • Max. Module power 120-480W (12V) / 240-960W (24V)
  • Max. Charging current 10-40 A
  • Type. Own power consumption <50 mA
  • Temperature range - 25 ° C to + 60 ° C
  • Degree of protection IP20
  • Dimensions 302.5 x 182.7 x 63.5 mm
  • Connection terminals 25 mm²

Features

The controller can be monitored and set using the MT50 display or adapter cable and software. The controller can be monitored using the PC software.
4 types of batteries can be set. In the User battery type, the charging voltages are freely selectable and programmable via the software. (Lithium batteries)
A switchable load output gives the user the option of switching on or off all consumers that are connected to the solar charge controller at the push of a button on the controller or via software settings on the PC.
2 timers can control night lighting as soon as the controller detects "night" through the solar module.
Yield measurement of all system parameters and monitoring possible via PC software.
The controller can be set and monitored with the optionally available MT50 display.

Datasheet English

Manual English

Manual German

BUY 10A NOW

BUY 20A NOW

BUY 30A NOW

BUY 40A NOW

iTracer Series

The charge controllers of the iTracer series are industrial goods with an extended Maximum Power Point Tracking (MPPT) algorithm. You can supply the maximum available power for charging batteries.

Properties

  • MPPT (Max Power Point Tracking)
  • Maximum charging current 60 amps
  • Automatic system voltage detection 12/24/36 / 48V
  • Solar input module open circuit voltage from 5V to 145V open circuit voltage
  • Battery deep discharge protection, overcharge protection, overvoltage protection
  • RS485 / Can-bus interfaces available
  • Monitoring via PC software
  • Temperature-dependent charging parameter correction
  • Fanless convection cooling up to 50 ° C
  • Timer function up to 1-15 hours option for night lighting
  • Automatic day / night detection
  • Load output with switch-off option
  • 4 battery types adjustable (open acid, AGM, gel, user)

Technical specifications

  • Battery nominal voltage 12/24/36/48 DC
  • Module open circuit voltage up to 145V DC
  • Max. Module power 720W (12V) / 1440W (24V) / 2160W (36V) / 2880W (48V)
  • Max. Charging current 60 A
  • Type. Own power consumption <1.5 W
  • Temperature range - 25 ° C to + 60 ° C
  • Degree of protection IP20
  • Dimensions in mm 440 x 231 x 110
  • Weight 5.9 kg
  • Connection terminals 35 mm²

Features

The controller can be monitored and set using the software supplied. The controller can be monitored using the PC software.
4 types of batteries can be set. In the user battery type, the voltages are freely selectable and programmable via the software. (Lithium batteries)
A switchable load output gives the user the option of switching on or off all consumers that are connected to the solar charge controller by pressing a button on the controller or via software settings on the PC.
2 timers can control night lighting as soon as the controller detects "night" through the solar module.
Yield measurement of all system parameters and monitoring via PC software possible.

Datasheet English

Manual English

Manual German

BUY NOW

VS AU Series

The VS series is a generation of charge controllers for off-grid solar systems, such as street lighting, solar home systems or small power plants, etc. It combines an LCD display, reliable battery charging, fully electronic protection, programmable parameters as well as other features and powerful functions.

Advantages

  • Intelligent 3-level PWM charge detection: bulk, boost / equalize, float
  • 3 supported battery options: Sealed, Gel, and Flooded
  • LCD display
  • Multiple types of load control
    Battery temperature compensation
    Comprehensive electronic protection devices

Available in:

  • 30/45/60 A for 12/24/36 / 48V system voltage
  • 10/20/30/45/60 A for 12 / 24V system voltage

Properties

  • Keeps the battery fully charged
  • Can be used for acid, AGM, gel
  • Reverse polarity protection for battery and solar panel
  • External battery temperature sensor can be connected
  • Prevents damage to the battery
  • Automatic shutdown if the charging current exceeds the capacity of the controller
  • Timer function option for night lighting
  • LCD display
  • PWM modulation
  • 2 USB ports

Application

  • Solar lighting system
  • Solar home system
  • Solar monitoring
  • Caravan and boats
  • Solar road traffic signals
  • Solar power plant

Technical specifications

PWM charge controller 10/20/30/45/60 A

  • System voltage 12 / 24V
  • Open circuit voltage up to 50V
  • Positive grounding

PWM charge controller 30/45/60 A

  • System voltage 12/24/36 / 48V
  • Open circuit voltage up to 96V
  • Positive grounding

Datasheet English

Datasheet German 12-24V

Datasheet German 12-48V

Manual English

BUY 12-24V NOW

BUY 12-48V NOW

VS BN Series

The devices of the VS BN series can charge and discharge a battery automatically, especially with off-grid PV systems.

The current operating state is determined by a hybrid actuator and, as a result, the charging process is optimized by the principle of pulse width modulation. Therefore, PWM charge controllers are significantly more effective than simple linear charge controllers.
The built-in microprocessor gently charges the battery, thereby guaranteeing a long lifespan for your solar batteries.

The charge status and the charging via the solar module can be seen from the LEDs. The built-in undervoltage protection prevents the battery from over-discharging. Overcharging of the batteries is thus prevented since the charge controller ends the charging process when the full capacity is reached.

Properties

  • Keeps the battery fully charged
  • Can be used for acid, AGM, gel and lithium batteries
  • Prevents the battery from supplying voltage to the solar system at night
  • Reverse polarity protection for battery and solar panel
  • External battery temperature sensor can be connected
  • RS485 / interface with Modbus protocol available
  • Automatic shutdown if the charging current exceeds the capacity of the controller
  • Automatic temperature compensation (ATC)
  • Timer function up to 1-15 hours option for night lighting
  • LED shows the charge status of the battery
  • LCD display with 4 buttons selection and menu
  • PWM modulation
  • Automatic switching on / off of the charging current, depending on the battery charge
  • 4 battery types adjustable (open acid, AGM, gel, user)
  • Suitable for lithium batteries

Application

  • Solar home system
  • Traffic signals
  • Solar lighting
  • Video surveillance

Technical specifications

PWM charge controller 10/20/30/45 A

  • System voltage 12 / 24V
  • Open circuit voltage up to 50V
  • Negative grounding

PWM charge controller 45/60 A

  • System voltage 12/24/36 / 48V
  • Open circuit voltage up to 96V
  • Negative grounding

Datasheet English

Datasheet German 12-24V

Datasheet German 12-48V

Manual English

Manual German

BUY 12-24V NOW

BUY 12-48V NOW

EP Series

The EP series is a double battery charging control for caravans, campers, boats and golf carts etc. The charging priority can be selected.

Solar charge controller with system voltages from 12V to 24Volt for 2 different batteries with up to 320/640 Watt module output at 12V / 24Volt battery voltage.

The charge controller is connected between the solar module and the consumer battery and vehicle battery and controls the charging process so that the batteries are always charged to the maximum. It can charge one battery as well as two different batteries with different priorities.
The built-in microprocessor gently charges the battery, thereby guaranteeing a long lifespan for your solar batteries.

The charge status and the charging via the solar module can be seen from the LEDs.
Overcharging of the batteries is prevented since the charge controller ends the charging process when the full capacity is reached.
The integrated microprocessor controls the switching thresholds of the charging process precisely and temperature stable.

Product characteristics

  • RJ45 interface for remote display for optional external display MT1
  • Yield measurement with optional display
  • PWM charging with temperature compensation
  • LED display for charging and battery charge status
  • Keeps the battery fully charged
  • Prevents the battery from supplying voltage to the solar system at night
  • Reverse polarity protection for battery AND solar panel
  • Automatic temperature compensation (ATC)
  • LED shows the charge status of the battery
  • Automatic switching on / off of the charging current, depending on the battery charge
  • 3 battery types adjustable (acid, AGM, gel)

Technical specifications

  • System voltage: 12V, 24V (automatic detection)
  • Nominal PV power: 160 / 320W (12V) 320 / 640W (24V)
  • Maximum charging current: 10-20A
  • DC input voltage (modular working voltage) max. 27V with 12V battery and 37V with 24V battery
  • Leakage current with no charge: = <4mA
  • Temperature compensation: -30mv / ° C / 2V
  • Temperature range: -35 ° C to + 55 ° C
  • Dimensions: 153 x 76 x 37 mm
  • Weight: 100 g
  • Protection class IP20 (dry room)
  • Connection terminals for max. Cable cross section 6mm²

Manual English

Manual German

BUY NOW

Inverter
STI Series

The STI series sine wave inverters are fully digital and impress with their intelligent design. DC 12V / 24V / 48V to 220V AC / 50Hz, high performance DSP

Properties

  • high reliability
  • high efficiency
  • light weight
  • small volume
  • full protection functions
  • easy installation
  • easy operation

The inverter is used in many areas, especially for solar photovoltaic systems. It has been specially developed for many types of AC loads such as household appliances, power tools and industrial devices.

Technical Details

  • Nominal input voltage: 12 V / 24 V
  • Input voltage: 10.5 ~ 16VDC
  • No-load current: ≤5W
  • Output voltage: AC220V ± 3%
  • Nominal output: 200/300 VA
  • Max. Short-term power: 300/450 VA / 10 sec.
  • Output mode: single
  • Waveform: pure sine
  • Frequency: 50Hz ± 0.5%
  • Efficiency at nominal power: ≥81%
  • Temperature range: -25 ° C to + 50 ° C
  • Dimensions: 315 x 166 x 101 mm
  • Storage temperature: -35 ℃ ~ + 70 ℃
  • Operating height: <5000 m

Datasheet English

Manual English

Manual German

BUY NOW

SHI Series

The SHI series sine wave inverters convert 12 / 24V direct current fully digital into 220 / 230V 50 / 60Hz alternating current. The SHI series is characterized by high reliability, high efficiency, compact size, easy installation and operation.

The inverters can be used for a wide variety of devices such as household appliances, electrical tools and industrial applications and are particularly suitable for photovoltaic systems.

Characteristics

  • Input and output are completely isolated from each other
  • Advanced SPWM technology for pure sine output
  • Dynamic performance control technology for reliable operation
  • Large DC input voltage range
  • Low harmonic distortion (THD = 3%)
  • LED display for input voltage, power output, function and error display
  • Switchable energy saving mode
  • Switchable output voltage and frequency
  • Comprehensive protection functions against short circuit, overload, undervoltage on the input side and overtemperature
  • Internal error detection
  • Wide operating temperature range (industrial level)
  • Continuous operation at full power

Technical specifications

  • Nominal battery voltage: 12V or 24V
  • Continuous power: 600W / 1000W / 2000W
  • Maximum power: 1350W / 2250W / 4600W (short-term peak)

Datasheet  English

Datasheet German

Manual English

BUY NOW

Inverter Charger
UPower Series

Inverter / charge controller UPower series from EPSolar for PV / solar applications. Suitable for solar, car, boat, camping, outdoor, caravan, motorhome etc. Ideal for use in remote areas with many hours of sunshine and with a lack of reliable suppliers.

The function of the integrated MPPT charge controller ensures fully digital and efficient energy storage and use. The inverter with integrated charge controller of the UPower series converts 12 / 48V direct current into 220 / 230V 50 / 60Hz alternating current with pure sine wave. The manual adjustment of the utility and PV electricity charges enables the ideal ratio of your energy use. This makes the UPower particularly convincing in remote environments with its reliability and responsiveness.

Characteristics

  • Charge controller and inverter in one device
  • High stability in the output voltage
  • Selection function for the ratio of utility and solar power
  • MPPT technology for determining the maximum credit point
  • Numerous protective functions: over / under voltage of the battery, over / under voltage at inputs and outputs, protection against reverse polarity and short circuits
  • Charging power limits
  • Compensation function for temperature changes
  • Protection against internal overheating with intelligent ventilation
  • Sophisticated SPWM technology for the pure output of sine waves
  • low distortion factor (= THD = 3%)
  • 4.2 "display for showing the system status and real-time data
  • Easy adjustment of the working parameters with 4 buttons
  • Optional: Wi-Fi module for wireless monitoring and control
  • Control using PC software or APP

Technical specifications

  • Nominal battery voltage: 12V or 48V
  • Continuous power: 800W / 4000W
  • Maximum power: 2000W / 10000W (short-term peak)

Datasheet English

Datasheet German

Manual English

Manual German

BUY NOW

Accessories
MT1 Display/Remote Control

The solar remote control with comfort display for the MPPT solar charge controller enables visual control of the charging parameters during operation and remote control of the MPPT solar charge controller.
The integrated real-time display enables an evaluation of the ampere hours.

Optional accessories for the EPIPDB series. The solar remote control with comfort display enables a visual check of the charging parameters during operation.
The integrated real-time display enables an evaluation of the ampere hours.

Characteristics

  • Easy handling
  • Display of the solar parameters
  • Selectable battery type
  • Display of the loading parameters
  • Control via four buttons
  • Remote control of the charge controller
  • incl. 2 meter cable

Manual English

Manual German

BUY NOW

MT50 Display/Remote Control

The solar remote control with comfort display for the MPPT solar charge controller enables visual control of the charging parameters during operation and remote control of the MPPT solar charge controller.

Monitoring and remote control are possible thanks to the integrated real-time display.

Characteristics

  • Easy handling
  • Display of the solar parameters
  • Display of the loading parameters
  • Integrated real-time clock
  • Yield record
  • Remote control of the charge controller
  • incl. 2 meter cable

Remote display MT50 with display suitable for EPSolar charge controllers:

  • LS-B
  • VS-BN
  • XTRA
  • Tracer BN
  • Tracer AN
  • Tracer A

Datasheet English

Manual English

Manual German

BUY NOW

eBox WiFi Adapter

The eBox-WIFI-01 adapter box enables wireless monitoring using WIFI communication between the solar controllers / inverters from EPSolar and the smartphone APP. Parameter setting, monitoring, etc. is conveniently possible via the APP interface.

Functions

  • Enables wireless monitoring monitoring of the solar controller / inverter
  • Support of the smartphone app by simple plug and play setting
  • High-performance CPU with M4 core
  • Ultra-low power consumption and the ability to process high-speed data
  • No external power supply necessary
  • Send and receive distance up to 50 meters
  • One-button reset to be able to reset to factory settings
  • Network cable included

Compatible with

  • LS-B
  • VS-BN
  • Tracer-A
  • Tracer BN
  • SHI
  • STI

The connection via WiFi works like any WiFi router. In its available WiFi networks, the Ebox appears as an open network with which you can then connect. Settings and monitoring only work using the EPSolar APP. With this APP you can monitor, set and read out your charge controller.

Datasheet English

Manual English

BUY NOW

eBox Bluetooth Adapter

The eBox-BLE-01 adapter box enables wireless monitoring using Bluetooth communication between the solar controllers / inverters from EPSolar and the smartphone APP. Parameter setting, monitoring, etc. is conveniently possible via the APP interface.

Functions

  • Enables wireless monitoring monitoring of the solar controller / inverter
  • Support of the smartphone app by simple plug and play setting
  • High-performance Bluetooth chip with ultra-low power consumption
  • Supports Bluetooth 4.0 and BEl technology
  • Fast communication with strong anti-interference ability
  • No external power supply necessary
  • Transmission and reception distance up to 10 meters
  • Master reset adapter
  • Network cable included

Compatible with

  • LS-B
  • VS-BN
  • Tracer-A
  • Tracer BN
  • XTRA
  • SHI
  • STI

The connection via Bluetooth only works with the EPSolar APP.
This Android APP is free and is offered via an external server (not Playstore). With this APP you can monitor, set and read out your charge controller.

Datasheet English

Manual English

BUY NOW

Temperature sensor

External temperature sensor for MPPT-BN-/VS-BN and LSB charge controllers

The temperature sensor is clamped to the charge controller and applied to the battery.
This way the sensor can provide the exact battery temperature to the charge controller.

Technical details:

  • length: 3 Meters
  • type of sensor: RTS300R47K3.81A

BUY NOW

Adapter Charge Controller

Adapter cable for charge controllers LSB-, MPPT-BN, VS-BN with RS485 connector and PC USB connector

Adapter cable for connecting EP-solar charge controllers of the new generation B to a computer via USB connection.

Via the monitoring software solar power, battery voltage and load output can be viewed in real-time and parameters can be changed.
This way you can monitor the values of the charge controller in real-time.

Not suitable for older controllers of the versions LS, MPPT-RN or VS-N

cable length: 90cm

BUY NOW

Charge Controller
XTRA Series
The XTRA-N series can display different display units (XDB1 / XDS1 / XDS2). The series includes a water-repellent housing (design) with protection class IP32. With the new XTRA-N series, the reliability of the devices has be... Read More
GoMate Series
The GoMate series combines design with technology and is an eye-catcher among solar charge controllers. The fully integrable solar charge controllers were specially developed for an aesthetically unobtrusive installation. They wor... Read More
Tracer AN Series (50-100A)
The Tracer AN series is based on multi-phase synchronous rectification technology (MSRT) and the advanced MPPT control algorithm. With dual-core processor architecture, the products offer high response speed, high reliability and high st... Read More
UPower Series
Inverter / charge controller UPower series from EPSolar for PV / solar applications. Suitable for solar, car, boat, camping, outdoor, caravan, motorhome etc. Ideal for use in remote areas with many hours of sunshine and with a lack of re... Read More
DuoRacer Series(10-30A)
Charge controller EPSolar MPPT DuoRacer 10-30A Highly efficient, compact and reliable charge controller to use the full power of your solar modules The MPPT charge controller DuoRacer from EPSolar was speci... Read More
Tracer BN Series (10-40A)
The Tracer BN series is EPSOLAR's second generation of MPPT control units. Compared to the Tracer series there is an improved communication ability. The die-cast aluminum design also ensures excellent heat dissipation. Compared to... Read More
iTracer Series
The charge controllers of the iTracer series are industrial goods with an extended Maximum Power Point Tracking (MPPT) algorithm. You can supply the maximum available power for charging batteries. Properties ... Read More
VS AU Series
The VS series is a generation of charge controllers for off-grid solar systems, such as street lighting, solar home systems or small power plants, etc. It combines an LCD display, reliable battery charging, fully electronic protection, p... Read More
VS BN Series
The devices of the VS BN series can charge and discharge a battery automatically, especially with off-grid PV systems. The current operating state is determined by a hybrid actuator and, as a result, the charging process is optimi... Read More
EP Series
The EP series is a double battery charging control for caravans, campers, boats and golf carts etc. The charging priority can be selected. Solar charge controller with system voltages from 12V to 24Volt for 2 different batteries w... Read More
Inverter
STI Series
The STI series sine wave inverters are fully digital and impress with their intelligent design. DC 12V / 24V / 48V to 220V AC / 50Hz, high performance DSP Properties high reliability high eff... Read More
SHI Series
The SHI series sine wave inverters convert 12 / 24V direct current fully digital into 220 / 230V 50 / 60Hz alternating current. The SHI series is characterized by high reliability, high efficiency, compact size, easy installation and ope... Read More
Inverter Charger
UPower Series
Inverter / charge controller UPower series from EPSolar for PV / solar applications. Suitable for solar, car, boat, camping, outdoor, caravan, motorhome etc. Ideal for use in remote areas with many hours of sunshine and with a lack of re... Read More
Accessories
MT1 Display/Remote Control
The solar remote control with comfort display for the MPPT solar charge controller enables visual control of the charging parameters during operation and remote control of the MPPT solar charge controller. The integrated real-time ... Read More
MT50 Display/Remote Control
The solar remote control with comfort display for the MPPT solar charge controller enables visual control of the charging parameters during operation and remote control of the MPPT solar charge controller. Monitoring and remote co... Read More
eBox WiFi Adapter
The eBox-WIFI-01 adapter box enables wireless monitoring using WIFI communication between the solar controllers / inverters from EPSolar and the smartphone APP. Parameter setting, monitoring, etc. is conveniently possible via the APP int... Read More
eBox Bluetooth Adapter
The eBox-BLE-01 adapter box enables wireless monitoring using Bluetooth communication between the solar controllers / inverters from EPSolar and the smartphone APP. Parameter setting, monitoring, etc. is conveniently possible via the APP... Read More
Temperature sensor
External temperature sensor for MPPT-BN-/VS-BN and LSB charge controllers The temperature sensor is clamped to the charge controller and applied to the battery. This way the sensor can provi... Read More
Adapter Charge Controller
Adapter cable for charge controllers LSB-, MPPT-BN, VS-BN with RS485 connector and PC USB connector Adapter cable for connecting EP-solar charge controllers of the new generation B to a computer via USB connecti... Read More